 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| www..com LMB402CFC LCD Module User Manual Shenzhen Topway Technology Co., Ltd. Rev. 0.1 Descriptions Prelimiay release Release Date 2006-08-19 URL: www.towpaydispaly.com www.topwaysz.com Document Name: LMB402CFC-Manual-Rev0.1.doc Page: 1 of 11 TOPWAY Table of Content 1. LCD Module User Manual LMB402CFC Basic Specifications................................................................................................................ 3 1.1 1.2 1.3 1.4 Display Specifications......................................................................................................... 3 Mechanical Specifications .................................................................................................. 3 Block Diagram .................................................................................................................... 3 Terminal Functions ............................................................................................................. 4 2. 3. Absolute Maximum Ratings.................................................................................................... 5 Electrical Characteristics........................................................................................................ 5 3.1 3.2 3.3 4.1 4.2 4.3 4.4 DC Characteristics.............................................................................................................. 5 LED Backlight Circuit Characteristics ................................................................................. 5 AC Characteristics.............................................................................................................. 6 Basic Setting....................................................................................................................... 7 Resetting the LCD module ................................................................................................. 7 Display Memory Map.......................................................................................................... 8 Display Commands .......................................................................................................... 10 www..com 4. Function Specifications .......................................................................................................... 7 5. Design and Handling Precaution ......................................................................................... 11 URL: www.towpaydispaly.com www.topwaysz.com Document Name: LMB402CFC-Manual-Rev0.1.doc Page: 2 of 11 TOPWAY 1. Basic Specifications 1.1 LCD Module User Manual LMB402CFC Display Specifications 1) LCD Display Mode : STN, Negative, Transmissive 2) Display Color : Display Data = "1" : Light Gray (*1) : Display Data = "0" : Deep Blue (*2) 3) Viewing Angle : 6H 4) Driving Method : 1/16 duty, 1/5 bias 5) Back Light : White LED backlight Note: *1. Color tone may slightly change by Temperature and Driving Condition. *2. The Color is defined as the inactive / background color www..com 1.2 Mechanical Specifications 1) Outline Dimension : 182.0 x 33.5 x 11.9MAX (See attached Outline Drawing for details) Block Diagram BLA BLK 1.3 LED Backlight Circuit COM1 | COM16 LCD Panel 40 x 2 Char (5x8dots) VDD VSS V0 DB0 - DB7 RS, R/W, E ST7066U or equivalent ST7063C or equivalent SEG41 | SEG120 ST7063C or equivalent URL: www.towpaydispaly.com www.topwaysz.com Document Name: LMB402CFC-Manual-Rev0.1.doc Page: 3 of 11 SEG121 | SEG200 SEG1 | SEG40 TOPWAY 1.4 Terminal Functions Pin Pin No. I/O Name 1 VSS Power 2 VDD Power 3 V0 Power 4 RS Input 5 6 7 : 14 15 16 R/W E DB0 : DB7 BLA BLK Input Input I/O Supply Supply LCD Module User Manual LMB402CFC Descriptions Power supply, Ground (0V) Positive power supply LCD contrast reference supply Register Select RS=HIGH: transferring display data RS=LOW: transferring instruction data Read / Write Control bus: R/W=HIGH: Read mode selected R/W=LOW: Write mode selected www..com Data Enable Bi-directional tri-state Data bus In 8 bit mode, DB0 ~ DB7 are in use In 4 bit mode, DB4 ~ DB7 are in use, DB0~DB3 leave open Backlight positive supply Backlight negative supply URL: www.towpaydispaly.com www.topwaysz.com Document Name: LMB402CFC-Manual-Rev0.1.doc Page: 4 of 11 TOPWAY Items Supply Voltage Input Voltage Operating Temperature Storage Temperature LCD Module User Manual LMB402CFC 2. Absolute Maximum Ratings Symbol VDD VIN TOP TST Min. 0 0 -20 -30 Max. 6.0 VDD 70 80 Unit V V C C Condition VSS = 0V VSS = 0V No Condensation No Condensation Cautions: Any Stresses exceeding the Absolute Maximum Ratings may cause substantial damage to the device. Functional operation of this device at other conditions beyond those listed in the specification is not implied and prolonged exposure to extreme conditions may affect device reliability. 3. Electrical Characteristics www..com 3.1 Items DC Characteristics Symbol VDD VIH VIL VOH VOL IDD MIN. 4.7 0.8xVDD VSS 0.7xVDD VSS TYP . 5.0 1.5 MAX. 5.3 VDD 0.5 VDD 0.5 3.5 VSS=0V, VDD=5.0V, TOP=25C Unit Condition / Application Pin V VDD V RS, R/W, E, DB0 ~ DB7 V V IOH=-0.1mA, DB0 ~ DB7 V IOL=0.1mA, DB0 ~ DB7 mA VDD, VSS Operating Voltage Input High Voltage Input Low Voltage Output High Voltage Output Low Voltage Operating Current 3.2 LED Backlight Circuit Characteristics Symbol VfBLA IfBLA MIN. TYP. 5.0 MAX. 150 VBLK=0V, IfBLA=100mA, TOP=25C Unit Applicable Pin V BLA, BLK mA BLA, BLK Items Forward Voltage Forward Current Cautions: Exceeding the recommended driving current could cause substantial damage to the backlight and shorten its lifetime. BLA BLK No. of LED = 6 pcs URL: www.towpaydispaly.com www.topwaysz.com Document Name: LMB402CFC-Manual-Rev0.1.doc Page: 5 of 11 TOPWAY 3.3 AC Characteristics LCD Module User Manual LMB402CFC www..com Item E cycle time E high level width E rise time E fall time Address set-up time Address hold time Data set-up time Data delay time Data hold time Symbol tc tpw tr tf tas tah tdsw tddr th MIN. 1500 175 5 13 50 13 TYP. - VSS=0V, VDD =5V, TOP =25C MAX. Unit ns ns 20 ns 20 ns ns ns ns 125 ns ns Host Write Timing Diagram Host Read Timing Diagram URL: www.towpaydispaly.com www.topwaysz.com Document Name: LMB402CFC-Manual-Rev0.1.doc Page: 6 of 11 TOPWAY LCD Module User Manual LMB402CFC 4. Function Specifications 4.1 Basic Setting To drive the LCD module correctly and provide normally display, please use the following setting - N=1, 2-line display - F=0, 5x8 dots font - D=1, display on Note: *1. These setting/commands should issue to the LCD module while start up. *2. See the Display Commands section for details. www..comResetting 4.2 the LCD module When turning on the VDD and VSS power supply, LCD module will execute the reset routine automatically. It takes about 50ms. After the reset routine, the LCD module status will be as follow: Display clear DL=1, 8-bit interface N=0, 1-line display F=0, 5x8 dot character font D=0, Display off C=0, Cursor off B=0, Blinking off I/D=1, Increment by 1 S=0, No shift Note: *1. Reset routine could not generate the Basic Setting 4.3 Adjusting the LCD display contrast A Variable-Resistor must be connected to the LCD module for providing a reference supply to V0. Adjusting the VR will result the change of LCD display contrast. The recommended value of VR is 5k Ohm. LCD Module V0 VSS URL: www.towpaydispaly.com www.topwaysz.com Document Name: LMB402CFC-Manual-Rev0.1.doc Page: 7 of 11 TOPWAY 4.4 Display Memory Map LCD Module User Manual LMB402CFC There are two main memory-areas in the LCD module for display. - Character Generator RAM (CGRAM) - Display Data RAM (DDRAM) 4.4.1 Character Generator RAM (CGRAM) Character Generator RAM is for storing the User-defined Characters (5x8 dots font). Totally 8 User-defined Characters (character code = 00h ~ 07h) could be created. The User-defined Character Codes are 00h and 07h. They could be called into DDRAM as normal character. www..com User-defined Character Code 00h (08h) 01h (09h) 02h (0Ah) 03h (0Bh) 04h (0Ch) 05h (0Dh) 06h (0Eh) 07h (0Fh) CGRAM Address 00h 01h : 06h 07h 08h 09h : 0Eh 0Fh 10h 11h : 16h 17h 18h 19h : 1Eh 1Fh 20h 21h : 26h 27h 28h 29h : 2Eh 2Fh 30h 31h : 36h 37h 38h 39h : 3Eh 3Fh CGRAM Data (Font Pattern) D7 ~ D5 Not Use D4 ~ D0 5 x 8 dots font pattern 5 x 8 dots font pattern 5 x 8 dots font pattern 5 x 8 dots font pattern 5 x 8 dots font pattern 5 x 8 dots font pattern 5 x 8 dots font pattern 5 x 8 dots font pattern Not Use Not Use Not Use Not Use Not Use Not Use Not Use CGRAM Address Map URL: www.towpaydispaly.com www.topwaysz.com Document Name: LMB402CFC-Manual-Rev0.1.doc Page: 8 of 11 TOPWAY LCD Module User Manual LMB402CFC 4.4.2 Display Data RAM (DDRAM) ROM Characters (Character Code = 10h ~ FFh) could be written into DDRAM for displaying the Character (5x8 dots font). User-defined Characters (Character Code = 00h ~ 07h) stored in CGRAM could also be use. Calling Character Code 08h ~ 0Fh will call out User-defined Characters 00h ~ 07h respectively. DDRAM Address 00h 01h 02h 03h 24h 25h 26h 27h : : : www..com 40 x 2 Characters (5x8 dots font) 40h 41h 42h 43h 64h 65h 66h 67h DDRAM Address : : : DDRAM Address Map Note: *1. The mapping is based on top view of the LCD module *2. N=1, 2-line display *3. F=0, 5x8 dots font *4. D=1, display on 4.4.3 Character Code Rom Please refer to ST7066U-0A Data sheet URL: www.towpaydispaly.com www.topwaysz.com Document Name: LMB402CFC-Manual-Rev0.1.doc Page: 9 of 11 TOPWAY 4.5 Display Commands LCD Module User Manual LMB402CFC Code DB7 DB6 DB5 DB4 DB3 DB2 DB1 No. 1 2 Instructions Clear Display Return Home R/W DB0 RS Function Write "20h" to DDRAM and set DDRAM address (AC) to "00h" Set DDRAM address (AC) to "00h" and return cursor to its original position if shifted (DDRAM contents are not change) Set cursor moving direction and specify display shift, during data read and write of DDRAM and CGRAM. S=1, screen shifting; S=0, no screen shifting I/D=1, AC=AC+1 and if S=1, screen shift left I/D=0, AC=AC-1 and if S=0, screen shift right D=1, display on; D=0, display off C=1, cursor on; C=0, cursor off B=1, cursor blinking on; B=0, cursor blinking off Move the cursor or shift the display, where DDRAM contents. S/C=1, shift screen; S/C=0, shift cursor R/L=1, to right-side; R/L=0, to left side (if S/C=1, AC will not be changed) DL=1, 8-bit interface; DL=0, 4-bit interface N=1, 2-line display; N=0, 1-line display F=1, 5x11 dots font; F=0, 5x8 dots font 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 x 3 www..com Entry Mode Set 0 0 0 0 0 0 0 1 I/D S 4 Display ON/OFF Cursor or Display Shift Function Set Set CGRAM address Set DDRAM address Read Busy flag & address Write data to RAM Read data from RAM 0 0 0 0 0 0 1 D C B 5 0 0 0 0 0 1 S/C R/L x x 6 7 8 9 10 11 0 0 0 0 1 1 0 0 0 1 0 1 0 0 0 1 DL N F x x 1 AC5 AC4 AC3 AC2 AC1 AC0 Set CGRAM address in address counter 1 AC6 AC5 AC4 AC3 AC2 AC1 AC0 Set DDRAM address in address counter Check the system status and get the address BF AC6 AC5 AC4 AC3 AC2 AC1 AC0 counter content (AC6~AC0). D7 D6 D5 D4 D3 D2 D1 D0 D7 D6 D5 D4 D3 D2 D1 D0 BF=1, busy; BF=0, ready Write the data into internal RAM, where the address counter pointing at. Read the data from internal RAM, where the address counter pointing at. Note: *1. Do not use any other command not listed, or the system malfunction may result. *2. For the details of the Display Commands, please refer to ST7066U datasheet. URL: www.towpaydispaly.com www.topwaysz.com Document Name: LMB402CFC-Manual-Rev0.1.doc Page: 10 of 11 TOPWAY LCD Module User Manual LMB402CFC 5. Design and Handling Precaution 1. 2. 3. 4. 5. 6. www..com 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. The LCD panel is made by glass. Any mechanical shock (eg. dropping form high place) will damage the LCD module. Do not add excessive force on the surface of the display, which may cause the Display color change abnormally. The polarizer on the LCD is easily get scratched. If possible, do not remove the LCD protective film until the last step of installation. Never attempt to disassemble or rework the LCD module. Only Clean the LCD with Isopropyl Alcohol or Ethyl Alcohol. Other solvents (eg. water) may damage the LCD. When mounting the LCD module, make sure that it is free form twisting, warping and distortion. Ensure to provide enough space (with cushion) between case and LCD panel to prevent external force adding on it, or it may cause damage to the LCD or degrade the display result. Only hold the LCD module by its side. Never hold LCD module by add force on the heat seal or TAB. Never add force to component of the LCD module. It may cause invisible damage or degrade of the reliability. LCD module could be easily damaged by static electricity. Be careful to maintain an optimum anti-static work environment to protect the LCD module. When peeling off the protective film from LCD, static charge may cause abnormal display pattern. It is normal and will resume to normal in a short while. Take care and prevent get hurt by the LCD panel sharp edge. Never operate the LCD module exceed the absolute maximum ratings. Keep the signal line as short as possible to prevent noisy signal applying to LCD module. Never apply signal to the LCD module without power supply. IC chip (eg. TAB or COG) is sensitive to the light. Strong lighting environment could possibly cause malfunction. Light sealing structure casing is recommend. LCD module reliability may be reduced by temperature shock. When storing the LCD module, avoid exposure to the direct sunlight, high humidity, high temperature or low temperature. They may damage or degrade the LCD module URL: www.towpaydispaly.com www.topwaysz.com Document Name: LMB402CFC-Manual-Rev0.1.doc Page: 11 of 11 |
Price & Availability of LMB402CFC
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |